BROWNING VTWE-235 Take Up Unit Bearings

Brand:NTN; rs min:1 mm; Bearing ring (inner ring) WS mass:0.66 kg; Product Group:B04144; d:130 mm; Max operating temperature, Tmax:120 °C; Weight / Kilogram:0.646; Min operating temperature, Tmin:-20 °C; d1:170 mm; B:9 mm;

Recommended tightening torque for set screw:22 Nm; N:20mm; T min.:-20 °C; T max.:100 °C; Designation of housing:P210N-; H:57.2 mm; B:51.6 mm; Designation of bearing:UC210G2L4; S:19 mm; s1:25.8 mm;

rs min:2 mm; k:4 mm; Min operating temperature, Tmin:-40 °C; Radial clearance class:C4; da min:138.8 mm; Nlim:3,600 rpm; ra max:2 mm; Characteristic cage frequency, FTF:0.44 Hz; Characteristic rolling element frequency, BSF:8.47 Hz; Static load, C0:721 kN;

Grease Lubrication - T Seal:1800 rpm; Pre Install Clearance Max:0.140 mm; Dimension L:10.12 in; Weight:44 lb; C0 - Static Load:99000 lb; Shaft Size  :3-1/4 in; Oil Lubrication - M/N Seal:1300 rpm; Oil Lubrication - B/C/O Seal:1000 rpm; Grease Lubrication - B/C/O Seal:950 rpm; Eng Internal

Cg - Geometry Factor:0.0764; C - Cup Width:32.000 mm; a - Effective Center Location3:-10.7 mm; db - Cone Backface Backing Diameter:80.01 mm; G1 - Heat Generation Factor (Roller-Raceway):94; K - Factor7:1.73; Bearing Weight:1.9 Kg; Ab - Cage-Cone Frontface Clearance:4.1 mm; D:120.000 mm; C0 - Static

L1:77 mm; Recommended tightening torque for set screw:33 Nm; Designation of bearing:UC214G2T20; L:260 mm; s1:37.3 mm; N:22mm; B:74.6 mm; Designation of housing:PE214-; G:R1/8"; C0:45 kN;

D:150; Rolling Element Material:Steel; Outer Ring Shape:Flat; Load Direction:Radial; Retainer Type:Resin Forming; Accuracy Symbol:P5; Inner/Outer Ring Material:Steel; B:24; Bearing Style:Open Type; Number of Raceway Ring Rows:Single Row;

Bearing Material:[Steel] Steel; Number of Bearings:Single; Height Indication:Height Configurable; Bearing Retained:Yes (with retaining; Holder Surface Treatment:Black Oxide Coating; Bearing Retained:Yes (with retaining; Bearing Used:Deep Groove Ball Bea; Bearing I.D. d(mm):10; Width T(mm):15; Number

Bearing Used:Deep Groove Ball Bea; RoHS:6; Type:Bearings with Housin; Housing Material:304 Stainless Steel; Bearing I.D. d(mm):12; Number of Bearings:Double; Volume Discount:Available; Volume Discount:Available; Bearing Retained:No; Flange O.D. H(φ):40;

C90 - Dynamic Radial Rating (One-Row, 90 million revolutions)3:5010 lbf; Y1 - ISO Factor9:1.91; e - ISO Factor8:0.35; B - Double Cone Width:2.0940 in; D:3.8750 in; Cage Type:Stamped Steel; Aa - Cage-Cone Backface Clearance:0 in; Ca90 - Dynamic Thrust Rating (90 million revolutions)6:3040 lbf; C1 - D

Rolling Element Material:[Steel] Steel; Specifications, Environment:Standard; Accuracy(Class):Class 0; Rubugado Symbol:No; Width(mm):16; Material Symbol:No; Days to Ship:Quote; Combination symbol:No; Type:Ball; Acoustic Symbol:E (Low-Noise);

RoHS:6; Roller Lining:With Resin; D:35; B:18; Roller Type:Type R; Volume Discount:Available; Allowable Rotational Speed(rpm):1230; Shaft:Provided; Thread Size on Cam Follower (M)(mm):M16; Days to Ship:6 Days;

Grease Lubrication - T Seal:2200 rpm; Weight:28 lb; Dimension F:13.000 in; Pre Install Clearance Min:0.0037 in; Dimension D Max:10.44 in; Dimension G:4.2500 in; Dimension A:3.50 in; Full Timken Part Number:QVVPX16V211SB; C - Dynamic Load (Basic):57200 lb; Shaft Size  :2-11/16 in;

Type:Bearings with Housin; Shape:Flange Type; Flange O.D. H(φ):41; Number of Bearings:Double; Seals:DD (Contact Rubber S; Bearing I.D. d(mm):10; Bearing Part Number:6800; RoHS:6; Bearing Material:[Steel] Steel; Housing Material:[Aluminum Alloy] 201;

Weight:1.22 kg; L2:10 mm; s1:19.05 mm; A:37 mm; T max.:200 °C; L1:70 mm; d:30 mm; H1:89 mm; G:M6x1; Designation of bearing:UC206G2T20;